Standard SW304 stainless steel flue kits – 5m

£170.00£210.00 +VAT

Single wall push fit stainless steel flue kit contains 5 x 1m flue pipe and standard cowl. It’s the minimum you will need!



Our standard 5m SW stainless steel flue kit will be supplied in the diameter to suit your heater. It’s 0.5mm thick for gas and oil fired appliances. It’s supplied in bright annealed mirror finish and 304 grade stainless steel is suitable for temperatures up to 380°C and offers good corrosion resistance.

It’s important to note that this stainless steel flue kit is the absolute minimum you will need. 

Contents – 5 x 1m length and 1 x standard cowl.

Flue catalogue : SW PDF catalogue

Other useful flue parts which we can supply include :

♦  90° tee c/w draft stabiliser (recommended for automatic waste oil heaters)

♦  Elbows – 45% or 90%

♦  Additional lengths – 500mm or 1000mm 

♦  T bar wall brackets

♦  Locking bands – to seal the flue. High temperature silicone is also fine and costs less but will make taking the flue apart again (to clean or move) difficult.

♦  Roof seals kits

Please note that an increase in fuel consumption, smoke in the building, evidence of sooting, difficulty in lighting and staining around the appliance casing generally indicates a problem either with the appliance or a blockage in the system may have occurred. Do not use cleaning chemicals on the flue. Do not block or obstruct flue outlets or chimneys. Do not cover an appliance. Running appliances on constant low heat produces an increased level of condensation and may shorten the life of the product.


Availability: In stock
Model: Flue Kit
Description: Standard SW304 stainless steel flue kits – 5m
Flue Diameter: 150 mm
Weight: 10 Kg

130 or 150mm 6", 180mm 7", 200mm 8"

  • No products in the basket.